- Home
- ยป
- Our Products
- »
- Screw And Spiral Classifiers
Screw And Spiral Classifiers
SC-600mm diax5500mm long classifier
Product Brochure
Lifting Capacity | 25-30 TPH |
Usage/Application | Sand washer |
Size | 600 x 5500 mm |
Country of Origin | Made in India |
Speed | 900 RPM |
Deepa manufactures wet (Screw and Bucket) and dry classifiers. The classifiers separate out dust and fines from crushed rocks and manufactured sand
SC-900mmx6000mm long Screw Classifier
Product Brochure
Material | Iron |
Lifting Capacity | 60 - 80 TPH |
Usage/Application | Sand Washing |
Country of Origin | Made in India |
Dia x Length | 900 x 6000 mm |
Model Name/Number | SC 900 |
Speed | 1200 RPM |
Power | 7 HP |
Deepa manufactures wet (Screw and Bucket) and dry classifiers. The classifiers separate out dust and fines from crushed rocks and manufactured sand
Cast Iron Spiral Classifier
Product Brochure
Material | Cast Iron |
Lifting Capacity | 110-130 TPH |
Usage/Application | Sand Washing |
Country of Origin | Made in India |
Power | 10 HP |
Dia x Length | 1200 x 7500 mm |
Note: Extra GST applicable
Deepa manufactures wet (Screw and Bucket) and dry classifiers. The classifiers separate out dust and fines from crushed rocks and manufactured sand
SSC 600 Screw Classifier
Product Brochure
Material | Iron |
Lifting Capacity | 30 - 40 TPH |
Usage/Application | Sand Washing |
Country of Origin | Made in India |
Speed | 1500 RPM |
Dia x Length | 600 x 5000 mm |
Power | 5 HP |
Model Name/Number | SSC 600 |
Screw Classifier is an ideal machine to wash and a separate silt and other impurities as well as dewatering sand after wash. It combines both the functions of washing and dewatering and is very effective.
It consists of a slow rotating and gently elevating spiral screw in a tub with an inclined trough and its function is simple. Water is sprayed under pressure on to sand fines in the screen, and the sand slurry is gently let into the classifier tub full of water without causing any turbulence. The silt and other impurities get floated and discharged over weirs. The coarser particles i.e. sand settle at the bottom. The double start screw rotating at slow speed rakes up the settled sand particles and conveys up through the inclined trough. This is a continuous process and as the washed sand moves up the excess water in the sand mix is drained back to the tub and at the discharge point a relatively water free sand is obtained.
Features:
- High performance
- Low maintenance
- Consistency
Note: Extra GST applicable